Cylinders & Actuators - Stainless Steel NFPA - Numatics Series S
Double Acting - with Cushioning - 1 1/2 to 8

The S Series is a stainless steel NFPA Interchangeable pneumatic cylinder line. It is designed and built to perform in the toughest "wash down" applications. The stainless steel construction provides outstanding corrosion resistance while including a multitude of favorable design features. The S Series encompasses many of the same proven design features as our original NFPA Interchangeable cylinder, the A Series. This includes an extra-long rod bushing and a standard oversized wear band (located on the rear of the piston). Additionally, we have also included the proven "T" Seal piston seal configuration with carboxilated nitrile with self-lubricating PTFE® compound. These are just a few of the features that make the S Series the Superior Stainless Steel NFPA Interchangeable air cylinder line.

Standard Specifications:

1）Meets NFPA specifications
2）Bore sizes from 1-1/2" through 8"
3）Piston rod diameters from 5/8" to 1-3/4"
4）Nominal pressure rating is 150 psi air
5）Standard temperature -10°F to 165° F(-23° C to 74° C)
6）All stainless steel construction, except piston (aluminum)
7）NPTF ports
8）Flexible port and cushion location
Features:

1）Head and cap are machined from 304 stainless steel for corrosion resistance.
2）Superior port design allows increased flow rate.
3）Piston is solid aluminum alloy that is strong and lightweight.
4）Extra wide wear band is located at the furthest point from the rod bushing to support maximum loading.
5）Piston seal is a carboxilated nitrile with PTFE compound for no lube added service. The seal design prevents rolling and seals at all pressures.
6）Tubing is 316 stainless steel with hard chrome plated inside diameter for long service.
7）Floating cushion design gives the fastest stroke reversal possible by providing instantaneous full flow to piston. Each cushion has flush, retained adjustment needle.
8）Rod seal is carboxilated nitrile with PTFE compound. The rounded lip design insures proper sealing and long life for no lube added service.

专业制造、专业服务，微通为你创造更多价值

不断提升服务质量，精益求精，“真诚的服务”是微通永恒的主题。微通严格按照 ISO9001-2000 质量体系认证要求，质量严格把关，责任到人，确保生产、销售、服务的健康运行。加强与用户沟通，竭诚为广大客户提供优质产品，至善至美服务，特此我厂做出如下承诺：

产品标准

产品严格按照中国 GB、HG 标准和美国 API 等标准设计、制造、验收。密封面硬度达到国家规定要求，宽度超过国家标准。

售前服务

产品介绍，技术交流，非标产品设计，疑难解答。

售中服务

守信合同，保证及时供货，随时保持与客户联系。

对特殊或复杂的产品，我厂安排技术人员对用户进行产品使用、故障排除、调式及维修进行培训和指导。

售后服务

微通产品质保期为自出厂起 12 个月，实行“三包”服务(包退、包换、包修)。

产品在使用中我厂定期组织技术、检查人员进行访问，征询用户对产品质量、使用状况、改进意见等方面的反馈，以便进一步提高产品质量。

对用户投诉产品质量问题，快速做出反映，售后服务人员在 24-36 小时(省外 48 小时)赶赴现场。

对售后服务，要求用户填写服务后的质量反馈表，并做出鉴定意见，一边提高嘉德的服务质量。

订货流程

客户采购清单请传真至 021-37013235-818

电话：021-37013235/3238-802

联系人：陈工

Q Q ：79238737

手 机：13621973906（微信同号-24小时服务）

邮箱：ctj539@163.com

收到客户采购清单，为客户提供阀门型号选型与报价(价格清单)。

具体商定：交货期、特殊要求等事宜。

订货须知

客户对产品有特殊要求，须在订货合同中提供以下说明：

（1）结构长度；

（2）连接形式；

（3）公称直径、全通径、缩径、管道尺寸；

（4）运用介质及温度、压力范围；

（5）实验、检验标准及其他要求；

（6）本场可根据客户特殊要求配置各类驱动装置；

如由客户提供确定的阀门类型和型号时，客户应正确说明其型号的含义和要求，在供需双方理解一致的条件下签订合同。

联 系 人：陈工    
Q     Q：79238737  
手    机：13621973906 （微信同号）
座    机：021-37013235/3238 转 802
传    真：021-37013235-818
E - mail：ctj539@163.com